Descriere produsComentarii (0) Boxe Wharfedale Opus 2-M2 Drive Unit Technology: Opus uses advanced neodymium and alnico magnets to produce intense and focused flux fields that provide a tight grip on drive unit movement. The soft dome midrange, the most advanced unit of its kind, provides tonal balancing throughout the range. The bass cone, a woven carbon fibre composite unit exhibits incredible linearity and control with a textbook response and rise time. Dynamics are dramatically harder and faster with no noticeable bass overhang. Piano Gloss Finish: All models are finished to a piano gloss standard, using selected hardwoods. Protected with 10 upward coats of varnish, each coat is cut and polished by hand after being naturally dried at atmospheric temperature. Only the highest standards of finish are deemed acceptable. Curved Cabinet: Constructed with a special variety of wood composite which is manufactured from Australian Eucalyptus and Pine blended with synthetic resins. This grade of wood is prized for its inherent qualities of strength, homogeneous consistency and its flawlessly smooth finish. With the curved shape enclosure, standing waves are prevented from starting and bass energy is maintained rather than absorbed. Opus ‘Tri-pole’ Surround: Twin pairs of dome mid-ranges and tweeters fire at angles. This speaker is designed to be hung on rear or side walls in pairs to create the ideal rear soundstage for modern multi-channel systems. The front firing 6.5” or 170mm bass driver extends the bass response to around 60Hz. Gold-plated Terminal & Spikes: Heavy duty, shielded and gold-plated tri-wire terminals are supplied. Bridge links for either single, bi or tri wiring, (or amping) enable a wide choice of amplifier and cable options to suit every budget and taste. The floorstanding models are supplied with integral plinth stand, securely making a very good mechanical contact even on uneven floors or carpet pile. Type 3-way stand-mount   Bass driver 200mm KEVLAR   Mid-Range 75mm Textile dome   Tweeter 25mm Te

Descriere produsComentarii (0) Caracteristici tehnice: Amplificator Alpine BBX-F1200 Instalare Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals Generale Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red status LED 2 pair RCA pre-inputs   Putere Maxima Total Max Power: 600W Putere RMS Per Channel into 4ohms (≤1%THD+N): 4 x 50W Per Channel into 2ohms (≤1%THD+N): 4 x 70W Bridged into 4ohms (≤1%THD+N): 2 x 130W Reglare sunet Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP/HP:  50Hz – 500Hz 3/4 Ch: LP/HP:  50Hz – 500Hz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB (3/4 Ch only) Dimensiuni Footprint: 330 mm x 52 mm x 240 mm Generale Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 2.7 Kg Scrie o recenzie Amplificator Alpine BBX-F1200 Nota (0.0) bazata pe 0 aprecieri ( Scrie o recenzie

Descriere produsComentarii (0) Caracteristici tehnice: Amplificator Alpine BBX-T600   Instalare Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals Generale Amplifier Type: Class-A/B Channel Design: 2/1 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red Status LED 1 pair RCA pre-inputs 1 pair RCA pre-outputs   Putere Maxima Total Max Power: 300W   Putere RMS Per Channel into 4ohms (≤1%THD+N): 2 x 50W Per Channel into 2ohms (≤1%THD+N): 2 x 70W Bridged into 4ohms (≤1%THD+N): 1 x 130W Reglare sunet Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP: 50Hz – 250Hz   HP: 80Hz  – 1.2kHz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB Dimensiuni Footprint: 250 mm x 52 mm x 240 mm Generale Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 1.9 Kg Scrie o recenzie Amplificator Alpine BBX-T600 Nota (0.0) bazata pe 0 aprecieri ( Scrie o recenzie

Detector radar Beltronics Pro 300 eltronics PRO300 este un model de top din gama profesionala Beltronics. PRO300 de la Beltronics este urmasul binecunoscutului Beltronics Bel RX65 , acum imbunanatatit cu o distanta de detectie mai mare si cu mai putine alarme false. Beltronics PRO300 are o raza foarte mare de detectie in benzile K si Ka fiind astfel recomadarea noastra pentru cei care isi doresc un detector radar Beltronics la pret bun cu performante peste medie. Testat cu noul radar de pe Logan MCV. Se poate monta ascuns cu ajutorul caburilor "direct wire" de la Beltronics (montaj ascuns) Functii Beltronics PRO300 � Protectie FULL Band� Total Tracking Laser� (circuite si port dual pentru lentile laser cauta in continuu pentru pistoale laser, oferind raza maxima si protectie superioara.)� Advanced Digital Signal Processing (procesare avansata digitala a semnalului )� AutoScan - fucntie prin care detectorul selecteaza singul intre modurile City si Highway)� Selectable POP Mode Radar Detection (selectie mod POP)� Mod City - NoX� Ultra-Bright Matrix Display with 280 LEDs (display complex cu 280 leduri)� High-Intensity Red Display (display stralucitor albastru sau intens rosu)� Multiple High-Performance Laser sensors (senzori multipli performanti de laser)� Built-In Earphone Jack (jack casti audio)� Mute & AutoMute (functia mute si automute)� Completely Immune to the VG-2 "Detector-Detector" (system VG-2 - nu se utilizeaza in Romania)� Garantie internationala 1 an Prezentare Beltronics Pro 300 (Review Beltronics Pro 300):  Beltronics PRO300 este recomandat celor care doresc un detector radar cu fir cu performante bune la un pret mediu. Mai putine alarme false in orase datorita functiei de deselectare a benzilor, distanta foarte mare de avertizare, pret mediu, constructie solida, made in Canada. Un prieten pe care te poti baza.    Accesorii pentru montaj ascuns: Cu ajutorul acestui cablu se poate alimenta detectorul radar Beltronics Pro 300 direct de la instalatia electrica a masinii, astfel incat bricheta raman